Decorative wood panels, HPL, ACP, WPC, Flooring, Doors etc was showcased during Acetech Delhi, concluded from 14 to 17th December 2017 at Pragati maidan. A review of the show by team The Ply Reporter.
CENTURY PLY - Introduces New Range in Exterior/ Flooring and ProWud MDF
Century Plyboards (I) Limited introduced new range in Exterior facade and flooring along with ProWud MDF. Besides they also showcased range of products such as Doors, Door sets, Cement Fibre Board, Veneers and many more. Mr Sumit Roy, Business Manager – Exteria & Flooring said, “ The company has introduced exterior facade from 4 mm to 15 mm thickness with design papers used in single as well as double side which is also applicable for room division. In this category there are 40 sheets of craft paper has been introduced with features having UV protection. It is very much suitable for building facade application. The product is available in 100 colours and textures. While flooring is AC 3 and 5 in HDF of 8mm thickness imported from Germany.”
Talking about Century MDF ProWud Mr Pankaj Sharma of Century Ply said, “Unlike other MDF panels Century MDF ProWud is a product of Routing Grade and is made using technologies that include: Pressurized Refining System from Anditz, Austria; Advance Glue Injection & Spreading System which ensure fibres are homogeneously covered 360 with glue for better bonding. Century MDF Prowud is ecofriendly termite and borers resistant cost effective super smooth uniform and high density MDF made with Scalper Technology. The boards undergo 128 quality checks during manufacturing to ensure unmatched product quality.”
.jpg)
ARCHIDLAM - Flaunts Revolutionary Products
Archidply Industries limited, one of the oldest premier interior solutions company in India, had a luxurious stall at the exhibition in ACETECH New Delhi at Pragati Maidan from 14th-17th December ‘2017. Construction is an industry which is interwoven in all aspects and walks of life. It is not merely a bunch of several skills like engineering, design, using material and architecture, but it represents the temperament of the society and it’s cultural base. With the rise of modernization, it is very important for the construction industry to constantly evolve itself and invent new products. A result of extensive research and development, Archidply products are safe, durable and promise unmatched style.
The company show cased a wide variety of products ranging from Plywood, Veneer, Decorative laminate and Flush door. It was a great platform to meet the leading architects, interior designers and other top members of the fraternity, at the stall, and interact with them at a personal level.
Around 40-50 designs of Archidlam-Decorative laminates were displayed. ‘Look good on the outside. Feel good within.’ Keeping this idea in mind, Archidlam exhibited Xterno- Exterior Grade Compact laminates. Now it is possible to change the appearance of your exteriors in a wide variety of ways from exciting wood, stone, metal patterns and vibrant uni colours. Being water resistant and UV resistant it can be applied onto the exteriors of any building. This revolutionary product was a big show stopper!
Another crowd puller was the recently launched Anti Finger Print Laminate. This innovative product has a special coating making it resistant to finger print marks, scratches and scruffs. The surface is absolute matt, allowing no diffusion of light through the surface. It has anti static and anti bacterial properties making it chemical resistant and mould resistant. Being dust and maintenance free it looks new and pristine always. This flawless beauty was also flaunted at the exhibition.
A premium range of veneers, flushdoor and plywood were also show cased. The stall provided an excellent forum for developers, vendors, building material manufacturers, suppliers and as well as end users to become aware of these new revolutionary products in the industry. With the help of cutting edge science and technology, Archidlam delivers a world of high performance, aesthetics, quality, safety, and durability.
BHUTAN TUFF - Displayed Wide Range of Decorative Veneers and Doors
Bhutan Tuff of Amit Decorative Plywood Pvt Ltd showcased exclusive range of Decorative veneers and Doors at the exhibition. Mr. Manish Kedia, MD, Amit Decorative Plywood Pvt Ltd said, “Our decorative plywood is made of AAA grade of veneers with a choice of logs sourced from the best of forests. It gives a strong aesthetic appeal and is anti borer, termite resistance. We have also showcased range of Flush doors and Moulded panel doors. These are made of high density timbers, which are chemically treated and well seasoned. Battens are edge glued to make these doors durable and dimensionally stable. Special formulations of chemicals are used to poison the glue line against borers and fungus.”
“In recent times, plywood industry saw a gradual but a prominent shift from being a conventional to a more technology-driven industry, obsessed with quality. We saw an evolution in working methodologies, ensuring high standards of hygiene & superior product standardization meeting industry standards in worthy way,” Mr Kedia added. Bhutan tuff is North India based largest manufacturers of plywood, block board, flush doors and decorative veneers.
AICA LAMINATES - Launches 1 Mm Folder of Kaiya Range
AICA Laminates India Pvt Ltd presented exclusive range of premium textures from AICA and creativity and innovation with subtle elegance for KAIYA and launched 1 mm folder Design Inspirations 2018 inspired by nature. After launching the new folder of 1mm Mr. JL Ahuja, Director & COO, AICA Laminates India Pvt Ltd said, “In this exhibition KAIYA range has been launched having 72 items and 24 prints in exclusive colour patterns in five New Exotic finishes apart from regular Suede. This is the first time in India KAIYA range of laminates have been introduced which is indeed very innovative. Architectures like it very much as this range of products leaves an everlasting impact with its sheer beauty and grace. It is a superb fusion of perfect aesthetics blended with elements of excellent surface styling.” He added further after changing demand pattern we have done a lot of research and launched this folder. End users and designers were more in number at this exhibition who took much interest in this folder and new upcoming architects have taken lot of interests.”
They have also launched 20 new colour patterns and Altra shield HPL for exterior use. Each year the company introduces new colour patterns and designs as per the prevalent international trends which reflect the true spirit of the times, life stage changes and contemporary interior designing. The company’s motto of ‘challenge and creation’ is always as per the true Japanese tradition of facing challenges and coming up with creative solutions.
AMULYA MICA - Showcased ‘Seven Wonders’ Range with Many Other Products
Amulya Mica showcased Different Products Range at the exhibition in Delhi which included High Pressure Decorative Laminate, Post Forming Laminate and Seven Wonders Range of Amulya Mica in 18 Exclusive Premium Decor Designs procured from Chiyoda Corporation with exclusive marketing rights for South East Asia. They also showcased Unicore (made with core of same Decor paper as on the surface giving an aesthetic look to the edges of the laminates) and Amulya Plus+ (Scratch Resistance Laminate).
Exterior Grade Laminate —Amulya Cladding was also showcased with high UV and weather & fire resistance quality and with 10 years warranty. It is an ideal for exterior and cladding facades. “First time in India, in history of Exterior Grade Laminate, Amulya Mica is presenting Textured Surface. It is successfully tested in EPH Lab from Germany, National Test House, Kolkata & Thomas Bell - Wright International Consultants –Dubai,” said Mr Sanjeev Sharma, Regional Manager (North), Purbanchal Laminates Pvt Ltd.
Besides, Industrial Compact lam, Linear Grade, Marker Board, Chalk Board and Door Size Laminate namely Amulya Metallic Door Guard were also made an impact among the architects, engineers and interior designers. This range of Laminates consists of customized designs to give a soothing feel & and aesthetic look to Doors & Wardrobes. Synchronized Laminates-1.25mm (Registered Emboss): Amulya Synchronized laminates gives the real feeling of natural wood even with look and touch just like Wood veneer. Amulya Digilam in 1.25mm: perhaps first time with 1.25 mm thickness in panel trade in India. Amulya Digital has been specially designed to make high quality furniture with customized feature.
“To make Amulya Mica more durable in actual use, its core support has been crafted with imported high quality craft paper impregnated with straight phenolic resin. It gives us an edge over competitors and we give warranties on products for 7 years, if laminates are preserved under normal storage condition. SPT technology makes laminates capable of handling day to day stress and gives resistance from scratches, dust, boiling water stain & rough handling. Apart from offering high quality mica, some of other salient features, which we offer are: Customers centric approach, Ethical business practice, Prompt delivery, Transparent business dealing, etc,” said Mr Sanjeev Sharma, Regional Manager (North), Purbanchal Laminates Pvt Ltd and Amul Boards Pvt Ltd .
Innovative at every opportunity, the company is manufacturing more than 600 designs and 80 finishes like suede, matt, glossy and textured from imported designs paper like Chiyoda, Japan, Techno Cell – Europe, Schattdecor, Suddeco, Interprint, Decotec-spain etc. Their products finishes have dimensional stability in normal condition and resistant to surface wear & tear.
REHAU - Touches the Skies of Glory
REHAU, a global leader in Polymer Processing Technologies participated in the Asia’s leading trade fair for architecture, building materials at Delhi. During the exhibition REHAU showcased their diverse product portfolio that promises Advanced Living Solutions in the sectors: Building Solutions, Furniture Solutions and Window Solutions. They also conducted ‘Click-And- Win’ Selfie contest and ‘Spin-The- Wheel’ game that brought in many interesting entries and results. Winners were awarded with tickets to international destinations along with other exciting prizes.
With the live demonstration of REHAU’s Radiant Heating and Cooling Systems, large number of visitors got attracted to their stall. The visitors also got an opportunity to get a first-hand experience of REHAU’s cutting edge products including RAUCORD weaving material, RAUVISIO Surfaces, RAUPIANO Plus Drainage Systems, RAUTITAN Water Supply Systems and RAUVOLET Roller Shutter systems.
During the exhibition at Delhi, REHAU was presented with the ‘Design Wall Award’ for RAUVISIO Crystal, which added yet another feather to their cap.
OUM LAMITECH - Unveils Stallon SX with 42 Textures/Colours
OUM Lamitech (P) Ltd launched their Stallon SX folder at the exhibition in Delhi which having 42 textures and colours in 1mm. The laminate has been manufactured with imported exclusive designs with European paper. “People want soft look out of traditional theme, so we have presented a different concept in the folder with combination of laminates in different shades which can create wonder after application in interior and furniture,” said Mr Anil Kejriwal, Director, OUM Lamitech (P) Ltd.
He added further, “The new age people are sophisticated and look for soft feelings. What we are giving new is ROOM CONCEPT while earlier there was wardrobe only concept. The new concept makes the ambience comfort and soothing from every angle after application. These concepts have been offered for home as well as commercial places with good quality. Besides, we are also offering HPL in 6 mm thickness which is most suitable for exterior grade wall cladding. We are giving 10 years guaranty on this product. People are getting aware
to use this and the demands are increasing day by day.”
OUM Lamitech currently has a considerable market share with huge potential for growth. With increasing consumerism, aesthetics play an important role in decision making process. Also due to hectic lifestyle and paucity of time, consumers are increasingly looking for readymade home décor solution. OUM Lamitech provides their consumers with a variety options. Oum Lamitech Pvt. Ltd. (Oum Plytech Pvt. Ltd.) was set up to manufacture decorative laminates in Delhi in November 2004, with the remarkable effort of Mr Anil Kejriwal, a first genre adventures entrepreneur and in a very short span of existence has created a special niche for itself in the industry.
.jpg)
ALUDECOR - Introduces Three Innovative ACP Installation Systems
Aludecor introduces three ACP installation systems PER, HR and MFR which facilitate no use of silicone sealant. This is first time in India any ACP company has introduced installation system which will replace use of silicone sealant and give maintenance free solution. Talking about the new installation systems Mr Saurav Kabra, Manager-Design & Application and Biswapriya Nandi, Sr Manager Corporate Communication said, “PER is Pressure Equalised Rain-screen system is new technology which leaves very less space while installation and gives seamless colour after installation, HR System is hanging rain screen system which reduces the electricity consumption for AC due to insulated material used inside. It is suitable for vertical facade, secondly it is pre managed for installation that saves time and money in terms of labour costs. And MFR System is mail female rain-screen system which is applied in both sides as upper and lower base and both of them gets interlocked which facilitate faster installation.”
They also said these innovative systems will replace use of silicone for installation. These solutions are available for commercial use with 15 years of warranty. Offering world class product for the people at large Aludecor is one of the world’s premier metal composite panel designing & manufacturing company which manufactures international standard, innovative and inspirational products backed by service in a socially and environmentally responsible manner to provide solution to the design imagination of the architectural fraternity, keeping in mind the health and safety at large.
TIMEX - Showcases Different Range of ACP and Exterior HPL
TIMEXBond Industries Pvt Ltd showcased different range of ACP and exterior Laminates in different series such as Solid & Metallic, Wooden, Mirror, Sparkle, Stone, and Exclusive Series (Miracle, Silver brush, Diamond White and Stainless Steel Finish), Glossy etc. Catering to the architectural design fraternity the innovative ideas were presented which received a considerable attention.
“TIMEX BOND is a brand synonymous with quality, durability and innovation. We’re recognised globally as the leading manufacturer and exporter of ISO certified Aluminium Composite Sheets and also as a reputed name in the Veneer and Plywood industry. State-of-theart infrastructure and internationally trained engineers help us create products that are high on style yet at par with global standards,” said Mr Kuldeep Singh, Area Sales Manager TIMEXBond Industries Pvt Ltd.
VIVA - Introduces A2 Fire Proof ACP and 6mm HPL in Different Finishes
Viva Composite Panel (P) Ltd introduced Viva A2 fire proof Aluminium core panel first time in India and 6mm HPL series in rustic, textures, marble and stone finishes. Besides they have also introduced De-coding design folders at the exhibition in Delhi. “We are coming up with colour coating manufacturing unit which will be installed in two-three months. This will be second unit in India of its type. With this unit we will be able to deliver any colour combination developed at the unit and within seven days any colour can be developed. Customers will find it in local market instead of looking for China and other country which are offering such solution,” said Mr Aungad Kunwar, Zonal Manager, Viva Composite Panel (P) Ltd.
PYRAMID - Ply’s ‘Bao Bache’ Glue Lam Timber and Thermo Treated Wood Attracts Many
Pyramid Ply & Wood Products (P) Ltd introduced glue lam timber “Bao Bache” imported from Europe and thermo treated wood in 4.5 mm also imported from Europe. Talking about the advantages of this wood Mr S K Aggarwal of Pyramid Ply & Wood Products (P) Ltd said, “Thermo treated wood has many applications as it is used in doors and various decorative and furniture applications. While ‘Bao Bache’ brand of glue lam timber is available in 6x2 and 12x2 inch which is a ready to make timber and do not require processing for finishing. It has no warping quality and gives total finishing at a time. Wood has its own importance. It has feel and gives smoothness and comfort. People should love timber.” Besides, they also showcased ‘Egger’ brand flooring and many more wood species such as White Oak, Red Oak, Walnut, Cherry, Maple, White Beech, Pine, Larch, and Steam Beach etc.
LAHARI LAMINATES - Promoted Their Lazer Cut and Digital Laminates
Lahari Laminates Pvt Ltd promoted their lazer cut and digital laminates at the exhibition in Delhi. Besides, they also showcased decorative laminates, digital laminates, post forming laminates, colour core laminates, UV resistant exterior cladding panels (ECP) etc, and many more laminates range. Talking about the showcased Mr Pradeep Agrawal, CMD, Lahari Laminates Pvt Ltd said, “We offer wide range of plain and metallic shades, exclusive wooden and abstract patterns in thickness of 1 mm and 1.5 mm with wide range of finishes colours and textures. We have launched several unique and exclusive textures finishes.”
BISON PANEL - Promoted Smart Doors and UPVC Windows & Doors
Bison Panel of NCL Industries Limited, maker of cement bonded particle board, introduced ABS smart doors, GI Window and doors and UPVC windows from Wintech and many more building materials and products at the exhibition in Delhi. “Our range of building material products attracted many architects and interior designers at this exhibition. The doors solution offered by us is thermo-formed, ready to use moulded door installed after completion of all civil work. It reduces labour oriented carpentry work and no painting or polish is required on it for ever. While smart doors is moulded & ready to use strong & impact resistant, maintain free, water proof, flame resistance available in six elegant models. Its decorative film used PVC is of high ingredients which gives a long lasting finish and in harmony with nature. There are many advantages of NCL ABS doors over traditional doors,” said Mr Kamlesh Thakur, Vice-President (North) Marketing.
The company’s SECCO plus smart GI windows and doors in wood texture and finish are available in Ajantha & Eco 4000 series with provision for grill and fly mesh shutter. SECCO Plus doors and windows are made of specific steel alloy with a hit zinc coating that can protect the profile from oxidation on both sides.
WOODTEC - Promoted 3D Embossed WPC Exterior Cladding
Woodtec of Ocean Thermoplastic Elastomers Pvt Ltd showcased range of products made of WPC like doors, door frames, boards, decking, Jallis and wall cladding etc at the exhibition in Delhi. Mr. Ashish Pandey, Director, Ocean Thermoplastic Elastomers Pvt Ltd said, “We have introduced 3D embossed WPC exterior cladding in this exhibition. WPC demand is growing day by day. It is a future product with lot of advantages as it is waterproof, termite proof and fire resistant free from formaldehyde and other harmful substances. It has same processing performance as wood with advantages of no splinters & warping. Its nailability and screw-ability is higher and can be fixed with them as wood. Being smooth without sanding WPC is getting popular among carpenters, contractors, interior designers and architects in various applications of interior and furniture manufacturing.”
HILLWUD PLYWOOD - Marks Its Presence with Range of New Products
Hillwud from the house of Haploos Plyboards Pvt Ltd based in Yamunanagar , Haryana propelled itself into the market by participating in the exhibition held at Pragati Maidan, New Delhi. Already an established name for Plywood, Blockboard and Flush Doors, brand HILLWUD has dawned into a new era by introducing several new products such as Shuttering Ply, Calibrated Ply, Flexi Ply and a Liner range.
During the exhibition a huge number of architects/ interior designers flocked in at the stall and showed interests towards the wide variety of the products at display. People from all over the country starting from the peaks at J&K to all the way down south to Tamil Nadu were curious about this supposedly new brand which has been existent in the market for almost over two decades. Company’s MD Shri Shyam Agarwal was himself present in the exhibition along with Mr Aman Agarwal , Mr Nikhil Agarwal and Hillwud’s authorised dealer Mr. Pramod Goyal from Goyal Plywood Traders, Delhi to greet all the valuable guests.
Talking about the objective to participate in this exhibition Nikhil Agarwal said, “We have been manufacturing Plywood for about 30 years now, and all along that our customers have bought it because of the sole reason which is our quality. It’s a well established and ever consistently strengthening bond of trust. We don’t just sell wood based products, we are here to form and strengthen that bond of trust. Today we sell our products all across India and it’s only sold at the counters in the name of quality. With this exhibition and many more our single goal is to reach out to more people, to share this trust of quality, to give them the opportunity to use our product with all the faith in their heart.”
They received a tremendous response from all sectors of design and construction groups and individuals. Everyone was looking to get a taste of Hillwud. The end users coming up with them were impressed with the unique range of products showcased to enhance the look and feel of the spaces.
“Our another purpose was to introduce to the market the new face of Hillwud, it’s mascot Mr Long Life - a turtle which truly represents the brand and specifically our products’ longevity, the symbol of years of trust, a beacon of strength and durability. And to our overwhelming exhilaration the response to the stall generated a lot of interest which led to a lot of enquiry. Various leading architects of New Delhi and adjoining region visited the stall and appreciated the 16 mm calibrated plywood and PF plywood product range” said Aman Agarwal.
CPL - Introduces Natural Veneered Finished Laminates
with thickness of 1.15 mm in full range along with showcasing 100 percent Gurjan Plywood and
marine plywood and economical grade 710 at the exhibition in Delhi. “We are catering all over India with our range of products in laminate, pre-lam particle board, plywood and MDF. Very soon the company is launching decorative veneer. Here in the exhibition we have received a very good attention of architects, interior designers and contractors and carpenters,” said Mr Anil Aggarwal of Singhal Plywood Industries Pvt Ltd.
CROSSBOND - Showcased Aluminium Based HPL and Many More Products
CrossBond from Metro Panels Industries showcased Aluminium based HPL, PVC Laminates, Interior Metal Laminates embossed series, Aluminium Partition panel and ACP. Besides, they have also showcased pre-laminated wood particle board at the exhibition in Delhi. “We believe in finding newer, more economical, aesthetically better and more durable solutions for both interior and exterior uses of our panels and we are offering quality products to our customers. Due to which we have received plenty of enquiries from the customers at the exhibition,” said Amar Jyoti, Business Development Manager, Metro Panels Industries.
ARIN - Presents Digital Printing on Veneer and Customised Solutions with Fusion
Arin Wood products Pvt Ltd introduced their range of veneer products like digital printing on veneers, customise veneer in 8’x4’ sheet and fusion by combining different veneer in one sheet. They also showcased their metallic series of veneer, exterior wall cladding and flush door. Mr Vinod Dhoot of Arin Wood Products Pvt Ltd said, “We are getting very good response from Architects and interior designers of our innovative presentation of fusion of veneers. It gives a unique look and feel at the area of application. We are giving this solution as a customised solution according to the choice of our customers, architects and engineers need. This has changed the market scenario of veneer market as earlier there was plain veneer available. Our offerings of digital printing on veneer and fusion of veneer have made an impact in this."